Join Our Newsletter
Receive the latest news on new promotions, exclusive offers, and new arrivals.
This DPDT relay device provides electrical isolation for all of our single-point switches. Relay coils are available for 110VAC, 220VAC, or 12VDC applications. The isolated output contacts can be used to switch a wide variety of voltages. The peak power of the device being controlled should not exceed the rated load. The relay can be used for solenoid valves, pumps, and alarm applications that do not exceed the listed ratings.
Output Contact Ratings
(5-1, 5-3, or 6-2, 6-4)
|1 - Normally Open||2 - Normally Closed||
15A @ 220 VAC
|3 - Normally Open||4 - Normally Open||
30 A @ 30 VDC
|5 - Common (1-3)||6 - Common (2-4)||
1/3 HP @ 277 VAC
- Exceptionally reliable.
- Silver conduits for long life - 100,000 electrical cycles, minimum.
- Conforms to CENELEC standards.
- VDE-approved versions available.
Download LL050 General Purpose Relay Product Sheet (.pdf, 75KB)
LL050 General Purpose Relay Load Resistance Load (p.f. = 1) Rated Load 30A @ 250 VAC;
10A @ 28 VDC
Silver (Ag) Maximum Output Ratings
30A @ 250VAC
30A @ 110VAC
20A @ 28VDC
10A @ 120VDC
7A @ 250 VDC (inductive)
Maximum Switching Capacity 2,500 VA; 280 W Minimum Permissible Load 300 mA @ 12 VAC/VDC Operating Temperature Range -40°C to 55°C
(-40°F to 131 °F)
Dimensions 1.495" x 1.360" x 2.700"
38mm x 35mm x 69mm
Mounting Connection Molded-in tabs, connected via 1/4" solderable spade terminals
Copyright © 2018 APT Instruments. Powered by Miva