Join Our Newsletter
Receive the latest news on new promotions, exclusive offers, and new arrivals.
The LL051 liquid level controllers provide high-level, low-level, or bilevel control in a convenient octal plug-in package. Models are available for pump-up or pump-down operation. Transformer isolated AC voltage on the probes prevents electrolytic plating. Less than 1/1000 of an ampere of current is used to sense the presence of conductive liquid between the probes and common. Onboard sensitivity-adjustable units eliminate false tripping caused by floating debris and foaming agents. Isolated electromechanical relay contacts can be directly connected to the control circuitry or control pumps and solenoids. The LL051 controllers can be used at a distance of up to 500ft from probes, and twisted-pair or shielded cable is recommended.
- Dual probe level detection.
- Solid state circuitry, coated for moisture protection.
- Factory-fixed or adjustable sense resistance.
- UL and CSA approvals.
- Electromechanical relay output for isolation and reliability.
Download LL051 Level Controller Product Sheet (.pdf, 29KB)
LL051 General Purpose Relay Sensing Type ON/OFF Resistance Voltage at Probe Terminals 12 VAC nominal
Factory-fixed or adjustable to 100,000 ohms Sensing Resistance Tolerance
Factory-fixed - ±10%;
adjustable - guaranteed range
Voltage 24, 120, or 230 VAC Tolerance ±15% nominal Frequency 50/60 Hz Output Type Electromechanical Relay Contact SPDT isolated Output Contact Ratings
(1-3 or 1-4)
5A @ 220 VAC
10A @ 120 VAC
10A @ 30 VDC
Socket Rating 10A @ 300 VAC Controller Dimensions 1.75" x 2.375" x 2.75"
(45mm x 61mm x 70mm)
Socket Dimensions 1.5625" x 2" x .6875"
(40mm x 51mm x 18mm)
Total Installed Height 3.6875"
Transient Protection Dielectric Breakdown: 1500V RMS Minimum Environmental -20°C to 60°C Operating Temperature
(-4°F to 140°F)
Copyright © 2019 APT Instruments. Powered by Miva